Xylem OxiTop Control OC 100, Руководство по эксплуатации

Страница: 70 / 84

70
ba31114e07 08/2014
What to do if... OxiTop
®
Control OC 100
No active

!

No measurement has been
started.

The measuring heads are placed
at another location (e.g. other lev-
els in the incubator, other incuba-
tors, further storage locations).

The measuring heads have no
optical contact with the controller:
– Distance too great, angular
position imprecise
– IR window of the measuring
head averted from the control-
ler
– Shading by other object.

Controller defective

Modification of the distances or
angle

Search at other storage locations

Check the controller

Check the measuring heads (see
section 10.3 G
ENERAL INFORMATION
,
page 75)
cal test

due on
18.07.98!
(sample date)

GLP is switched on

The test resource monitoring is
due within the measuring time of
measurement for the selected
measuring head.

Date/time is not correctly set in the
controller.

Use another free measuring head
that has been checked

Start the due measuring head with
the Cal test (see section 7.5.4
CAL
-
TEST
, page 53)

Switch off GLP and start the mea-
suring head (if your laboratory prac-
tice permits this).

Set the date/time in the controller.
Lack of memory possi-
ble!
Memory for 11

free !
Continue
This message is used as information
in the operating mode.
There are a lot of sample data stored
in the sample management. The
memory is almost full.
It is still possible to start a sample as
a parallel sample start with 11 mea-
suring heads (the number 11

used
here is an example, possible num-
bers: 1...11

).
Problem solution, if necessary:

Erase finished samples
section 7.6.1 E
RASING FINISHED
SAMPLES
, page 57

Alternative: Changing the instru-
ment setting to automatic erasing of
finished samples:
section 7.4.6 D
ATA STORAGE
, page
47
Display message Cause Remedy