Xylem OxiTop Control OC 100, Руководство по эксплуатации

Страница: 52 / 84

GLP/TOOLS OxiTop
®
Control OC 100
52
ba31114e07 08/2014
The measuring head flashes.
A display appears on the con-
troller giving the following infor-
mation:

Series number of the measur-
ing head,

Battery status
(
OK / LOBAT / EMPTY !!),

the next calibration date (only
in operating
mode
BOD Standard )

Status of the measuring head
(
free / used / defective ).
If the measuring head is " used ":

Use <

><

> to scroll
through the display of further
information:
– Start date
– Final date
– Sample number
– Type and
– Measuring range of the
measurement

Use <RUN/ENTER> to return
to the CHECK menu.
Repeat the procedure for each
measuring head.
If the measuring head does not respond, the following display
appears after approximately 7 seconds:
Query stopped!
You can select between
- Continue query (see above)
and
- Stop (return to the CHECK
menu)
RUN/ENTER