Xylem OxiTop Control OC 100, Руководство по эксплуатации

Страница: 67 / 84

OxiTop
®
Control OC 100 Maintenance, cleaning, disposal
ba31114e07 08/2014
67
9.1.4 Changing the supply battery (measuring head)

Change the battery after the measurement has been terminated.

Press in the snap-action holder and open the upper case.

Remove the batteries.

Insert new batteries (2 x lithium batteries, CR2430, e.g. WTW type
Batt/OxiTop
®
). When doing so make sure the batteries are inserted
in the correct position!

Insert the upper case with the lug in the locking pin (lower case).
Caution! Do not crush the cable connection!

Close the upper case (let the hook snap into place).
Check if the battery change was successful:
In the
GLP/TOOLS - Check -

info menu, Batteries : OK must appear.
The batteries do not affect the data integrity of the OxiTop
®
measuring
head.
Dispose of used batteries according to the local regulations of your
country.
End users within the European Union are obligated to return used
batteries (even ecologically compatible ones) to a collection point
set up for recycling purposes.
Batteries are marked with the crossed-out waste container symbol.
Therefore, they may not be disposed with the domestic waste.