Xylem OxiTop Control OC 100, Руководство по эксплуатации

Страница: 25 / 84

OxiTop
®
Control OC 100 Operating mode: BOD Standard / BOD Routine
ba31114e07 08/2014
25
Preselected:
- Continue transfer :
A new pass is made only for
measuring heads that have not
yet responded.
Return to the entry menu with -
Stop
For information on searching for
missing measuring heads, see
section 10 W
HAT TO DO IF
..., page
69
Point the controller at the measuring
heads:
The call up of further measuring
heads is performed in the scan-
ner mode.
Message that all the data of all
the measuring heads has been
called up. The instrument then
returns to the entry menu.
40 cm to 1 m
RUN/ENTER
Immediately after the complete measurement data records of a fin-
ished measurement have been called up, the corresponding mea-
suring head is given the
free status. The measuring head can be
used for a new measurement. The relevant sample in the
SAMPLE STATUS TYPE list ( sample management) is marked as
finished (see section 5.4 SAMPLE STATUS TYPE
LIST
(
SAMPLE
MANAGEMENT
), page 26), as soon as the measurement time has
expired and the data of all measuring heads of this sample have
been called up.