K021 Instructions v1.0
Bag H
Page
57
H6)
Put the springs on all the shocks. Silver rear. Brown
front.
We will install the rear shocks first.
H7)
Remove an upper shock mount tree (ASC 6473) from Bag H and cut the two
bushings off. Team drivers dress the bushings for appearance. Also get out two
#4 lock nuts (6071).
H8)
Slide the bushings over the upper shock mounting bolts so they are up against
the standard nuts. Slide the upper eye of the shock over the bolt and over the
bushing and secure with a lock nut. We do the top first because you will want to
rotate the shock out of the way so your nut driver will fit properly on the lock nut.
Be certain the shock moves freely on its bushing.
H9)
Consult the Set-Up sheet and Tuning Section to determine where you will mount
the bottom of your shocks. Insert a 4-40 X 1/2” cap head screw (6002) into the
eyelet at the bottom of each shock and screw the shocks into the rear of the
control arms. Here we have used hole #2 (middle).
