K021 Instructions v1.0
Bag H
Page
61
H16) In the rear, make sure the driveshafts are engaged in the diff outdrives (long
arrow), then install the camber links by pressing the ball cups over the ball studs.
(short arrows) Again, the hub carriers will be at crazy angles and you should
adjust until the axles are approximately horizontal. Final adjustment will be made
with the wheels on.
H17) Check the longer tie-rod turnbuckles to see that they are approximately the same
length. Now install them to the steering rack and steering block by pressing the
ball cups over the ball studs. Adjust until the axles are straight. Team drivers will
carefully measure to be certain the two steering turnbuckles are the same length
prior to installation. Final adjustment will be made with the wheels on.