K021 Instructions v1.0
Bag C
Page 23
C11) Slide the diff gear, with bearing in the center, onto the male outdrive. The diff
balls should contact the diff ring.
C12) Hold the male outdrive in one hand with your fingers over the two “ears” of the T-
nut. With the other hand, pick up the wrench with female outdrive, keeping the
wrench engaged in the thrust bolt. Slide the end of the bolt through the center of
the bearing and into the male outdrive, engaging it into the T-nut. Screw the bolt
a few turns into the T-nut, leaving things somewhat loose.
