![background image](http://html2.mh-extra.com/html/xfactory/x-6-squared/x-6-squared_instruction-manual_3299558017.webp)
K021 Instructions v1.0
Bag B
Page 17
B14) Position the bulkhead and top plate assembly on the front of the chassis (1006).
Be certain the three rear holes on the top plate fit down properly over the three
posts near the front of the chassis.
B15) Secure the bulkhead with two 5/8” flat head screws (6024) from under the
chassis through the two rear holes in the nose. Leave these screws finger tight
until inst. B16 below.
B16) Using the three 1/2” cap head
screws (6002), secure the rear of
the top plate to the chassis. Be
sure you pre-tap the chassis with a
4-40 tap. Now tighten the two
screws below the chassis from inst
B15 above.