Xerox ApeosPort-II 3000, Руководство пользователя

Страница: 26 / 619

1 Before Using the Machine
24
Be
fo
re
Usin
g
t
h
e M
ach
in
e
1
Do not use conductive paper such as carbonic paper or coated paper. When
paper jam occurs, it may cause short-circuit and eventually a fire accident.
When cleaning this product, use the designated cleaning materials exclusive
to it. Other cleaning materials may result in poor performance of the product.
Never use aerosol cleaners, or it may catch fire and cause explosion.
Never play the CD-ROM supplied with the product on an audio player. Always
use a CD-ROM player. Otherwise, large sound may damage audio players or
your ears.
Laser Safety
CAUTION: Any operations or adjustments not stated in the operation manual
may cause hazardous light exposure and eventually burn injuries or loss of
eyesight.
This product has been tested and found to comply with the Class 1 Laser
Equipment requirements defined by the international standard IEC60825 and
has no light exposure hazard. The product has no hazardous light emission as
it features light protection components and covers to shut in all light beam
during operation and maintenance.
Always follow all warning instructions marked on or supplied with this product.
To avoid the risk of burn injuries and electric shock, never touch the area with
the "High Temperature" or "High Voltage" marks on.
Keep electrical and mechanical safety interlocks effective. Keep the safety
interlocks away from magnetic materials. Magnetic materials may accidentally
activate the product and cause injuries or electric shock.
A ground fault interrupter is
embedded in this product.
If current leakage occurs,
the ground fault interrupter
automatically cuts off
power circuit to prevent
electric shock and a fire
accident. The ground fault
interrupter is normally ON.
Check once a month if the
ground fault interrupter
works properly in accordance with the following procedure:
1) Turn off the power of the product.
2) Push the RESET button of the ground fault interrupter and make sure the
button is kept retracted even after the pushing force is released.
3) Push the TEST button lightly with sharp edges such as pen tip and make
sure that the RESET button returns to the projected position.
This is the end of the check procedure.
4) Push the RESET button again and make sure the button is kept retracted.
If the circuit does not work properly, contact your local Fuji Xerox
representative.
<TEST> button
<RESET> button