Xerox ApeosPort-II 3000, Руководство пользователя

Страница: 552 / 619

16 Appendix
550
Appe
nd
ix
16
ESC/P-K Emulation Print Features
Multiple-Up
The multiple-up feature reduces the size of multiple-sheet documents and prints them
on a single sheet of paper.
The multiple-up feature can be used in the ESC/P-K emulation mode. In the ESC/P-K
mode, 2 Up can be used.
Form Overlay
In the ESC/P-K mode, you can register an original form to the printer, and overprint it
on a printed output.
A form to be overprinted can be specified on the control panel.
Barcodes
In the ESC/P-K mode, you can use barcodes. The barcodes that can be used are as
follows.
z
JAN code
z
CODE39
z
CODABAR
z
Industrial 2 of 5
z
Industrial 2 of 5
z
Interleaved 2 of 5
Forms
You can use ESC/P-K to register forms on the machine. Up to 64 forms can be
registered.
ESC/P-K Emulation Settings
The following tables show the basic and extended settings that can be configured on
the ESC/P-K emulation mode menu.
Basic Settings
Setting Item
Item
Number
Value
Paper tray 3 Sets the paper tray to be used for printing.
[0]
: Auto
[1] (Default) : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5 (Bypass)
If printing from Tray 5 (Bypass), instruct printing and then operate the
machine to start printing. To cancel the setting, change the setting for
"Tray 5 Confirmation".
Important • When Tray 1, 2, 3, or 4 is selected, the size of paper loaded in the tray
becomes the output paper size, and thus [Paper Size] cannot be set.
Note • When [Auto] is selected, and if the paper of the same size is loaded in
the same orientation in multiple trays, paper will be supplied in the
order of Tray 1
J
Tray 2
J
Tray 3
J
Tray 4. If paper of the same size
is loaded in multiple trays but in different orientations, the paper
loaded in the landscape orientation is given priority.