Xerox ApeosPort-II 3000 Скачать руководство пользователя страница 455

Страница: 455 / 619

Error Code

453

roblem Solv

003-753

[Cause] The selected resolution was too high for scanning mixed

size documents using the 2-sided feature.

[Remedy] Set [Scan Resolution] to [200dpi], and try again.

003-756

[Cause] The fax document is all blank.
[Remedy] Check whether or not the document is blank or the

document is correctly loaded.

003-757

[Cause] The mixed sized document was to be scanned with high

resolution using the 2-sided feature.

[Remedy] Set [Scan Resolution] to [300dpi] or lower, and try again.

003-760

O O

[Cause] An incompatible combination of features are specified as

document scan conditions.

[Remedy] Check the selected options.

003-761

O O

[Cause] The paper size of the tray selected for auto tray is different

from the paper size of the tray selected for Auto Repeat.

[Remedy] Change the paper size for the tray, or change the [Paper

Type Priority] settings.

003-764

[Cause] The document has only one page even though [Form

Overlay] has been selected.

[Remedy] Load both the form document and the document to be

overlaid.

003-780

[Cause] Failed to compress the scanned document.
[Remedy] Reduce the resolution or the ratio for [Reduce/Enlarge] to

decrease the data size, or split the data to send it
separately.

003-795

[Cause] When enlarging/reducing a scanned document to the

specified paper size, the reduction/enlargement ratio value
is out of allowed range.

[Remedy] Take one of the following actions:

Manually enter a reduction/enlargement ratio.

Change the paper size.

003-970

Refer to 003-976.

005-275
005-280
005-283
005-284
005-285
005-286

O [Cause] An error occurred in the document feeder.

[Remedy] Turn the machine off and on. Contact our Customer

Support Center.

012-241
012-242
012-244

O [Cause]

Finisher malfunction

[Remedy] Turn the machine off and on. If the machine conditions are

not improved by performing the relevant remedy, contact
our Customer Support Center.

012-246

O Cause]

The Booklet Maker is not fully inserted in the C-Finisher
with Booklet Maker.

[Remedy] Fully insert the Booklet Maker, and turn the machine off

and back on.

Error Code

Category

Cause and Remedy

C P F S M O

* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is

printed on the label or card attached on the machine.

Содержание ApeosPort-II 3000











































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ApeosPort-II 3000

Отзывы:

Похожие инструкции для ApeosPort-II 3000

Бренды по названию

Популярные бренды

Xerox ApeosPort-II 3000, Руководство пользователя

Результаты поиска

Содержание ApeosPort-II 3000

Отзывы:

Похожие инструкции для ApeosPort-II 3000

Бренды по названию

Популярные бренды