Page
10-12
Problem Solving
Misfeeds in the Bypass Tray
À
Remove the paper and reload the tray.
Do not add paper to the tray when
paper is already loaded. Instead,
remove the paper, combine the
additional paper with the paper from
the tray and reload the tray.
À
When you load paper in the Bypass
Tray, the
Change Attributes
box is
displayed. If you change the media and
you do not change the attributes
accordingly, the machine might
misfeed because it is trying to sense a
size or type that is not loaded. Check
the attributes and run the job again.
Jams in the Document Feeder
À
Open the Document Feeder and check
to see if any paper or objects are
inside.
À
Check to see if the top cover on the
Document Feeder is firmly closed.
À
Check documents. If using computer
fanfold forms ensure that the
perforations down each side of the
sheets have been removed. When
removed the forms can be loaded
either short edge feed or long edge
feed.
Jams in the stapler
À
Remove the staple cartridge from the
stapler and shake the cartridge. The
staples on the bottom of the cartridge
can become weighted down and
jammed, especially with a full
cartridge.
Symptom
Recommendation
Содержание 220
