Xerox 220 Скачать руководство пользователя страница 198 | Manualshive

Страница: 198 / 280

Xerox 220 Скачать руководство пользователя страница 198

Page

8-4

Paper and other media

NOTE:

When loading oversize paper, always extend the

guides in the paper tray. Holding the paper approximately
1/2” above the paper tray, place one corner of the stack of
paper tightly into the left-front corner and gently lower the
stack of paper into the tray.

À

If required, move the paper
tray guides to accommodate
the new paper size.

- To release the rear guide

push down on the tab and
slide the guide to its new
position. The tab will reset
once the guide is correctly
in place.

- To adjust the right guide, lift

the guide and slide the
guide to its new position. If
not positioned correctly the
guide will not slot into
place.

À

Make sure that the guides
lock tightly into place. If the
paper is not firmly against the
sides of the paper tray and
the guides, paper jams may
occur.

Rear guide

Right guide

«
...
196
197
198
199
200
...
»

Содержание 220

























































































































































































































































































Отзывы:

Нет отзывов