Woodward highprotec MRI4, Руководство пользователя

Страница: 500 / 727

Protective Elements
Setting Group Parameters of the Switch Onto Fault Module
Parameter Description Setting range Default Menu path
Function Permanent activation or deactivation of
module/stage.
inactive,
active
inactive [Protection
Para
/<1..4>
/SOTF]
ExBlo Fc Activate (allow) or inactivate (disallow)
blocking of the module/stage. This
parameter is only effective if a signal is
assigned to the corresponding global
protection parameter. If the signal becomes
true, those modules/stages are blocked that
are parameterized "ExBlo Fc=active".
inactive,
active
inactive [Protection
Para
/<1..4>
/SOTF]
Ex rev Interl Fc Activate (allow) or inactivate (disallow)
blocking of the module/stage. This
parameter is only effective if a signal is
assigned to the corresponding global
protection parameter. If the signal becomes
true, those modules/stages are blocked that
are parameterized "Ex rev Interl Fc =
active".
inactive,
active
inactive [Protection
Para
/<1..4>
/SOTF]
I< The CB is in the OFF Position, if the
measured current is less than this
parameter.
0.01 - 1.00In 0.01In [Protection
Para
/<1..4>
/SOTF]
t-enable While this timer is running, and while the
module is not blocked, the Switch Onto Fault
Module is effective (SOTF is armed).
0.10 - 10.00s 2s [Protection
Para
/<1..4>
/SOTF]
500 MRI4 DOK-HB-MRI4-2E