Wood-mizer TVS-FT Series, Руководство пользователя, Страница: 96 / 116

ALIGNMENT
Saw Head Tilt Adjustment
5
5-28 MHdoc031016
3. Use the square to check if the saw heads are perpendicular to the table. Adjust if
necessary.
4. Check if the distance between the blades and tables at the left and right saw head is the
same (saw heads centering).
See Figure 5-28. Set the saw heads width to about 140mm (5.51”). Measure the distance
from the blade on the left saw head to the left rope. Next, measure the distance from the
blade on the right saw head to the right rope. The measured distanced should be the
same. If they are not, use the nuts on the saw head width adjustment screw and two #46
Square