Wood-mizer TVS-FT Series, Руководство пользователя, Страница: 37 / 116

OPERATION
The LubeMizer System
Operation MHdoc031016 2-20
2
2.10 The LubeMizer System
Lube Mizer system is used to lubricate the blade during sawing. The LubeMizer applies
lubricant on both sides of the blade as you are sawing to reduce resin buildup on the
blade. The LubeMizer controls allow you to adjust the volume of lubricant for various
wood types. The LubeMizer option uses less volume than the standard Water Lube,
helping to reduce lubricant/sawdust mess and waste, and to prevent stained boards.
Usual flow will be between 2.6 - 9.5 liters (0,687 - 2,5 gallon) per hour.
1. To start the self-priming system,

Open the water lube bottle valve all the way.

Turn the lube control switch to PULSE
1
and set the lube dial to the desired flow rate.
Use the lowest setting that successfully eliminates pitch buildup.
NOTE: Softwood applications will usually require more
lubricant than hardwood applications.
2. Cut the log.
3. To shut of the lube,

Turn the lube control switch to OFF.

Close the lube bottle valve all the way.
4. If you are sawing or storing the machine in freezing temperatures, use windshield washer
fluid to help prevent the water from freezing.
CAUTION! Add windshield washer fluid to the water tank
and prime as recommended when sawing or storing the
machine in below-freezing temperatures. Use windshield
washer fluid with a freezing point of at least -20°F (-29°C).
Failure to do so will cause damage to the LubeMizer
system may result.
Lube Additives
For further benefits, add one 12oz.( 0.35 L) bottle of Wood-Mizer Lube Additive to a 5
gallon (18.9 L) jug of water. Wood-Mizer Lube Additive enables some previously
1Pulse is suitable for most cutting applications. CONTINUOUS delivers a steady stream of lubri-
cant and should be used only for heavy pitch buildup or occasional blade cleaning.