Wood-mizer TVS-FT Series, Руководство пользователя, Страница: 32 / 116

OPERATION
Machine Start
2
2-15 MHdoc031016 Operation
2.8 Machine Start
DANGER! Before starting the machine, perform these
steps to avoid injury and/or damage to the equipment:

Close the blade housing covers and replace any guards removed for service.

Check the feed track and remove all loose objects such as tools, wood, etc.

Check that the blades are properly tensioned.

Make sure all persons are a safe distance from the machine.

Check that the emergency stops are released.
NOTE: The machine will not start if either of the emergency
stops is on.
Before starting the saw heads, check that the main power switch servicing the machine is
on.
See Figure 2-7. Start the blade motors. To do this, turn the key switch to the position
and then push the Blade START button on the control panel (see the figure below). The
motors should start and the blades should start spinning.