Wood-mizer TVS-FT Series, Руководство пользователя, Страница: 105 / 116

ALIGNMENT
Blade Guide Vertically Tilt Adjustment
MHdoc031016 5-37
5
See Figure 5-35.
2. Place the Blade Guide Alignment Tool against the face of the upper blade guide roller.
3. Center the tool on the roller and measure the distance between the back edge of the
blade and the ruler at the end closest to the lower blade guide ("B").
4. Measure between the back edge of the blade and the other end of the ruler ("A").
5. The roller should be tilted slightly up (A = B - 6.0 mm [0.24"]).
6. Use the set screws to adjust the horizontal tilt of the roller.
7. Repeat steps 3-7 for the lower blade guide roller.
NOTE: Once the blade guides have been adjusted, any cutting variances are most likely
caused by the blade. See the Wood-Mizer® Blade Handbook, Form #600.
FIG. 5-35
Turn set screws to
adjust horizontal tilt