Wood-mizer TVS-FT Series, Руководство пользователя, Страница: 39 / 116

OPERATION
Operation Procedure
Operation MHdoc031016 2-22
2
2.11 Operation Procedure
1. Install a blade if necessary.
WARNING! Always wear gloves and eye protection when
handling bandsaw blades. Changing blades is safest when
done by one person! Keep all other persons away from
area when coiling, carrying or changing a blade. Failure to
do so may result in serious injury.
2. Close the blade housing cover.
3. Tension the blade
-
See Section 2.5 Tensioning The Blade .
4. Slowly spin the blade wheel by hand.
WARNING! Use extreme caution when spinning the blade
wheel by hand. Make sure hands are clear of blade and
wheel spokes before spinning. Failure to do so may result
in serious injury.
5. Check alignment of the blade on the blade wheels and blade guides. Adjust as
necessary.
6. Set the cutting width as desired.
DANGER! Make sure all guards and covers are in place
and secured before operating the machine. Failure to do so
may result in serious injury.
7. Perform pre-start check. See Section 2.3 TVS Setup
8. Start the blade motors.
9. Turn on the Lube Mizer system.
10. Using the feed track speed switch, set the feed rate as desired.
DANGER! Always be sure all persons are out of the path of
the blade before starting the motor. Failure to do so will
result in serious injury.
WARNING! Always wear eye, ear, respiration and foot
protection when operating or servicing your machine.