Wood-mizer TVS-FT Series, Руководство пользователя, Страница: 50 / 116

MAINTENANCE
Blade Guides
4
4-2 25doc031016 MAINTENANCE
4.2 Blade Guides
1. Check the rollers for performance and wear every blade change. Make sure the rollers
are clean and spinning freely. If not, rebuild them. Replace any rollers which have worn
smooth or have become cone shaped. See the Parts manual for blade guide rebuild kits
and complete roller assemblies.
4.3 Sawdust Removal
1. Remove the excess sawdust from the blade wheel housing sawdust chute every blade
change and saw heads lower rollers.
See Figure 4-1.
CAUTION! Never use grease on the saw heads lower
rollers as it will collect sawdust.
2. Remove the excess sawdust and slabs from the infeed and outfeed table, log deck and
cross transfer deck.
FIG. 4-2