Wood-mizer TVS-FT Series, Руководство пользователя, Страница: 44 / 116

SETWORKS OPERATION (Optional Equipment)
TVS Controller Panel
3
3-2 SW-07doc031016 SETWORKS OPERATION (Optional
Descriptions of the control panel buttons:
A, B, C, D, E - Heads width memory buttons.
SET ABCDE - Sets the blades width value to each memory button.
Save - Saves parameters determined by the operator.
Blades width manual setting buttons (in/out).
ENTER – enters values to the memory.
Auto Mode – Adjustment of the SW-08 automatic calibration parameters. Used for initial calibration
and recalibration if a dimensional error occurs.
Set Real Size - Sets the real distance between the saw heads. Should be set when the “Check real
size” indicator lamp is blinking.
A
SET
ABCDE
SAVE
ENTER
AUTO
CAL.
SET
REAL SIZE