Wood-mizer TVS-FT Series, Руководство пользователя, Страница: 47 / 116

SETWORKS OPERATION (Optional Equipment)
Operation, Memory Buttons (A, B, C, D, E)
SETWORKS OPERATION (Optional Equipment)SW-07doc031016 3-5
3
Confirm by pressing .

The end of the function is signalled, ” End CALL ” appears and the normal mode of operation is
restored.
NOTE: If, during the movement, the limit switch is activated, set
different head width and repeat the auto-correction function.
3.3 Operation, Memory Buttons (A, B, C, D, E)
After switching-on, the ”TBS-01” inscription appears on the display and the Setworks is ready for
operation within a few seconds or after
is pressed.

To set the saw heads to any width, enter the heads width value and press . The saw
heads will automatically move to the entered width value.
You can store up to 5 heads width values using the memory buttons.

To store the width value using the memory button, press and hold . On the upper display
the “ABC” will appear. Press the memory button (A, B, C, D or E), enter the width value and
confirm by pressing . Perform the same procedure for other memory buttons. Press
to exit this function.
ENTER
ENTER
ENTER
SET
ABCDE
SAVE
SET
ABCDE