OPERATION
Machine Start
Operation
MHdoc031016
2-16
2
To stop the blade motors, push the Blade Stop button shown in the figure above.
The blade motors also may be stopped by pushing either of the emergency stop buttons.
If either of the emergency switches has been used to stop the blade motors, turn the
switch clockwise before restarting the saw heads. The saw heads cannot be restarted
until the emergency stop button is released.
See Figure 2-8.
After the saw heads have been successfully started, the feed track can
be started. To start the track chain motor, turn the Track Start switch (shown in Figure 2-7)
right to start the track forward, turn the switch left to start the track backward. Press the
FIG. 2-7
I
II
STOP
START
STOP
START
STOP
TBS 01 Setworks
Real Size (mm)
Check real size
AUTO
CAL.
SAVE
SET
ABCDE
Position Size (mm)
ENTER
A
B
C
D
E
SET
REAL SIZE
Содержание TVS-FT Series
Страница 1: ......
Страница 2: ......
Страница 25: ...OPERATION TVS Setup Operation MHdoc031016 2 8 2 infeed table FIG 2 3 TVS SAW HEAD FIG 2 3 OUTFEED TABLE...
Страница 26: ...OPERATION TVS Setup 2 2 9 MHdoc031016 Operation FIG 2 3 ADDITIONAL INFEED TABLE...