Wintriss SmartPAC 2, Руководство пользователя

Страница: 536 / 604

1128600 SmartPAC 2 with WPC 2000 Integration User Manual
J-8 Option 1 User Inputs
the inputs are connected properly by displaying the appropriate input status screen (see
Viewing the Status of User Inputs
, page J-10).
Changing User Input Stop Type
WPC 2000 Option 1 user inputs are set to E-stop at the factory (see Table J-1, page J-2) but
can be modified on the Press Control User Interlock Menu in SmartPAC 2 Initialization. User
inputs 12-31 can be set to Top-stop, Top-stop/Lockout (a new setting), E-stop, E-stop/
Lockout, or Unused. Cross-checked input pairs 32/33, 34/35, 36/37, and 38/39 can be set to
E-stop or E-stop/Lockout.
Top-stop/Lockout is also available as an option for WPC 2000 user inputs 1-7 if you have
SmartPAC 2 firmware version 3.32 or higher. The Unused setting can be selected to bypass
inputs you are not connecting.
You can assign names to the auxiliary equipment you are connecting to Option 1 inputs on the
same screen on which you set the input stop type. A setup sheet on which you can document
equipment name/user input assignments is provided on page J-13.
To change the stop type for a user input, follow these instructions:
1.
On the SmartPAC 2 Main Initialization Menu (see Figure 4-1, page 4-1), move the
highlight bar to PRESS CONTROL, using the cursor keys, and press ENTER. The WPC
Initialization Menu (see Figure 4-18, page 4-23) displays with the USER INTERLOCKS
item highlighted by default.
2.
On the WPC Initialization Menu, press ENTER with USER INTERLOCKS highlighted.
The Change User Interlocks screen (see Figure J-4, page J-10) displays.
3.
Press the function key (i.e., F2 , F3 , or F4 ) corresponding to the group of user inputs (i.e.,
Group 1, Group 2, or Group 3) within which the user input you wish to update falls. The
Press Control User Interlock Menu for that user input group displays (see Figure 4-19,
page 4-24, which uses the screen for standard user inputs 1-11 as an example) with the
stop type for the first user input in the group highlighted.
4.
Perform steps 2 through 4 of the procedure documented in
User Interlocks
, page 4-24 to
change the stop type and assign a name to each user input you wish to re-program.
5.
When you are finished, press RESET to save your settings.
You cannot program control-reliable, cross-checked inputs 32-39 (or inputs 8-11 in WPC 2000) as
Top-stop/Lockout or Unused. These safety inputs must be set as either E-stop or E-stop/Lockout.
NOTICE