manualshive.com logo in svg

Wintriss SmartPAC 2, Руководство пользователя, Страница: 206 / 604

Поделиться
Скачать
Wintriss SmartPAC 2 Скачать руководство пользователя страница 206

1128600

SmartPAC 2 with WPC 2000 Integration User Manual

4-20

Initialization Mode

To set up items you wish to document for each tool, do the following:

1.

Select TOOL INFORMATION on the Main Initialization Menu.  The Tool Information 
Setup screen, shown in Figure 4-14, displays.

2.

Highlight the NAME 1 item, and press ENTER.  The Tool Information Name screen, 
shown in Figure 4-15, displays.

3.

Move the highlight bar to the name you want, using the cursor keys, and press ENTER.  
You are returned to the Tool Information Setup screen with the name you selected 
displayed.

This feature is not available if you have the optional PLC interface installed.

Figure 4-14. Tool Information Setup Screen

Figure 4-15. Tool Information Name Screen

NOTICE

Содержание SmartPAC 2





























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов