manualshive.com logo in svg

Wintriss SmartPAC 2, Руководство пользователя, Страница: 460 / 604

Поделиться
Скачать
Wintriss SmartPAC 2 Скачать руководство пользователя страница 460

1128600

SmartPAC 2 with WPC 2000 Integration User Manual

F-2

SmartPAC to SmartPAC 2 Upgrade

If you have programmed tool #99999999 in SmartPAC 1, be sure to make a copy of that tool 
with a new tool number, then delete tool #99999999 before initiating a backup.  In SmartPAC 
2, tool #99999999 is reserved for Tool Template, a new SmartPAC feature (see page 5-5).

If your tool database is small and programming isn’t complicated, you may opt not to use a 
backup utility.  It may be simpler to record SmartPAC 1 tool settings on a setup sheet, then 
enter the recorded settings into the SmartPAC 2.

Backing Up Tools to a Laptop

To use the SBR program to back up tools on your SmartPAC 1 to a connected laptop, refer to 
the “Using SBR to Upgrade from SmartPAC 1 to SmartPAC 2” section of the 

SmartPAC 

Backup and Restore Instruction Sheet

, which is provided with the SBR software.

Backing Up Tools to a Network Server

To back up tools on your SmartPAC 1 to a network server, perform the following steps:

1.

With the Main Program Menu displayed on the SmartPAC 1 front panel, press the 

1 

and 

CLEAR 

keys at the same time and hold them down for a few seconds until the Main 

Initialization Menu displays.

2.

Select the BACKUP/RESTORE menu item to display the Backup/Restore Control Menu 
(see Figure F-1).

When setting up SmartPACs in SBR, make sure to identify the control you are backing up as a 
“SmartPAC 1” and the control you are restoring to as a “SmartPAC 2.”  With these settings, SBR 
will back up all tools and Initialization settings from the SmartPAC 1, then, when it detects that a 
SmartPAC 2 is connected, restore only the tool settings, ignoring the Initialization parameters.

 

Figure F-1. Backup/Restore Control Menu

NOTICE

              BACKUP/RESTORE CONTROL MENU

DATE LAST BACKUP

PRESS A FUNCTION KEY

TO PERFORM THE DESIRED

RESTORE

ACTIVTY.  PRESS THE

RESET KEY TO EXIT.

BACKUP

F1
F2
F3
F4
F5
F6

Содержание SmartPAC 2





























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов