Wintriss SmartPAC 2, Руководство пользователя

Страница: 212 / 604

1128600 SmartPAC 2 with WPC 2000 Integration User Manual
4-26 Initialization Mode
2.
Highlight the stop type for the input you want to program. Press ENTER to change the
stop type. User Inputs 1 – 7 can be set to UNUSED, T STOP, E STOP or E LOC. Cross-
checked pair 8/9 can be set to E STOP or E LOC, cross-checked pair 10/11 to E LOC only.
3.
Use the Right (

) cursor key to move the highlight bar to the input’s name
(“UNNAMED” until you select another name). Press ENTER. The Select Stop Name
screen (see Figure 4-20) displays.
4.
Highlight the name you want, using the cursor keys, and press ENTER. You are returned
to the Press Control User Interlock Menu with the name you selected displayed in the
right-hand column next to the appropriate user input.
If you want to enter a name that does not appear in the list, select “CUSTOM” NAME,
and when the Alphabetic Entry window displays (see Figure 4-6, page 4-10), key in the
name, following the directions in the window, then press
F6 to accept your entry. You are
returned to the Select Stop Name screen.
If you are not using the input, select UNUSED.
If you have SmartPAC 2 firmware version 3.32 or higher and WPC 2000 firmware version
1.70 or higher, an additional stop type option, T LOC (Top-stop/Lockout), is available for
inputs 1-7.
Figure 4-20. Select Stop Name Screen
The name you enter for input 8 is applied to both inputs 8 and 9 in the cross-checked pair.
The name you enter for input 10 is applied to both cross-checked inputs 10 and 11. Once
you have established names for inputs 8 and 10, any name you attempt to enter for input
9 or 11 will be disregarded.
NOTICE
NOTICE