![background image](http://html1.mh-extra.com/html/winnebago/journey/journey_service-manual_987364048.webp)
SECTION 3 –
DRIVING YOUR MOTORHOME
3-22
6. Remove Forward Engine Access Cover and
set aside.
7. Reverse steps to reinstall engine access cover
and bed board.
Rearward Engine Access Cover (Beneath
head of bed)
In some cases, you may need further access of
the rear engine (beyond removing the Forward
Engine Access Cover, as previously described.)
A Rearward Engine Access Cover is located
beneath the head of the bed.
If you have a standard mattress, remove the
mattress from the bed and proceed to step 4.
1. Lift bed board and disconnect air bed hoses
from the pump (located beneath the bed
board).
2. Route air bed hoses through the hole at the
head of the bed.
3. Lower the bed board and remove mattress
from bed and set aside in another area of the
coach.
4. Lift the bed board and remove gas struts (one
located on each side of bed board).
5. Remove six screws (located on top of the
rearward bed board) and set aside.
6. Remove bed board and set aside in another
area of the coach.
7. Remove fasteners from metal engine cover
and set aside to access engine.
• Forward Engine Access
Cover
• Remove Forward Engine
Access Cover
• Route Air Bed Hoses
through hole at the head
of the bed.
• Remove six screws from
rearward bed board (three on
each side).