![background image](http://html1.mh-extra.com/html/winnebago/journey/journey_service-manual_987364112.webp)
SECTION 7 –
PLUMBING
7-20
3. Let the Ice Maker run through a cycle, then
raise the wire shut-off arm to the OFF
position.
4. Ensure water has drained from the Ice Maker
supply line, then reconnect to inlet valve.
5. Ice Maker is now winterized.
To use Ice Maker again after seasonal storage:
1. Flush antifreeze from the waterlines (if
antifreeze fill winterization procedure was
performed).
2. Close all drain valves.
3. Turn the water supply ON.
4. Ensure the ice bin is in place and the wire shut-
off arm is lowered to the ON position.
5. Let the refrigerator cool down to ice making
temperature. Remember, this can take up to 24
hours.
6. Let the Ice Maker cycle and dump the first
batch of ice.
Residential Refrigerator
1. Shut off water supply to the Ice Maker and/or
water dispenser. The water supply valve is
located inside a galley cabinet near the filter.
2. Remove Ice Maker Drain Line from exterior
Residential Refrigerator service compartment
and allow to hang loose on outside of vehicle.
3. Turn Ice Maker Winterization Drain valve to
the OPEN position.
NOTE: Leave the Ice Maker Winterization Drain
valve in the OPEN position throughout
storage period.
4. After the last batch of ice dispenses, raise the
wire shut-off arm to the OFF position.
5. Empty ice bin.
To use Ice Maker again after seasonal storage:
1. Flush antifreeze from the waterlines (if
antifreeze fill winterization procedure was
performed).
2. Close all drain valves.
3. Turn Ice Maker Winterization Drain valve to
the CLOSED position.
Ice Maker Water Supply Connection
(Located in refrigerator service access
compartment on outside of coach)
-Typical View
Ice Maker Drain Line
(Located in exterior Residential
Refrigerator service compartment)
Ice Maker Winterization Drain Valve
(Located in exterior Residential
Refrigerator service compartment)