![background image](http://html1.mh-extra.com/html/winnebago/journey/journey_service-manual_987364053.webp)
3-27
SECTION 3 –
DRIVING YOUR MOTORHOME
Turn the switch to the OFF or ON positions to
disconnect or reconnect the chassis batteries.
NOTE: The Chassis Battery Disconnect switch
must be on to start the engine.
CIRCUIT BREAKERS AND
FUSES – CHASSIS/DASH
AUTOMOTIVE 12-VOLT
The fuses, breakers, and relays for automotive
chassis and dash features are conveniently
located on the main 12-volt electrical panel in the
front left exterior compartment.
The circuit breakers pop outward if they are
tripped. Simply push in to reset.
Always replace plug-in type fuses with those
of the same amperage size.
See the chassis manufacturer’s fuse allocation
chart on the inside of the fuse block cover.
Further Information
See your chassis manual in your InfoCase for
further information about chassis supplied fuses
and relays.
Chassis Battery Disconnect Switch
(Located near entrance door)
-Typical View
12-Volt Automotive
Fuse Panel
12-Volt Automotive Breaker Panel
Automotive Circuit Breakers (push to reset)
• Breakers are labeled for components equipped
Automotive Fuses (cover removed)
Fuse Diagram (inside of cover)