3-15
SECTION 3 –
DRIVING YOUR MOTORHOME
SIGNAL LEVER/HEADLIGHT
HIGH-LOW BEAM
The signal lever controls the turn signals and
headlight high/low beams.
•
Move multi-function lever upward for right
turn signal and downward for left turn signal.
An audible chime will alert you when the
signals are flashing.
•
Pull end of handle toward you to switch
headlight high/low beams.
Further Information
See your chassis manual for further operating
instructions and features.
MAP LIGHT SWITCH
Driver Map Light Switch
Turn the Driver Map Light on using the panel
light brightness thumbwheel control (located on
left side of dash). Roll it upward until you feel it
click into the Map Light “On” position.
NOTE: The “Push” dial (for fog lights) are non-
functional.
Passenger Map Light Switch
Press the Passenger Map Light switch UP to
turn ON. Press switch down to turn OFF.
Further Information
Refer to the chassis manual provided in your
InfoCase for additional information on the Driver
Map Light switch.
Turn Signals/High-Low Beams
(Typical View - your coach may differ
depending on model)
Driver Map Light Switch
(Located on left side of dash)
-Typical View
Passenger Map Light Switch
(Located on passenger side trim panel)
-Typical View