![background image](http://html1.mh-extra.com/html/winnebago/journey/journey_service-manual_987364051.webp)
3-25
SECTION 3 –
DRIVING YOUR MOTORHOME
4. Remove fasteners from metal engine access
cover and set cover aside.
5. Reverse steps to reinstall engine access cover.
Rearward Engine Access Cover (Beneath
rear lavatory cabinet)
In some cases, you may need further access of
the rear engine (beyond removing the Forward
Engine Access Cover, as previously described.)
A Rearward Engine Access Cover is located
beneath the lavatory cabinet.
•
Remove screws that attach the white access
panels below lavatory cabinet. Remove
panels and set aside.
•
Remove fasteners from the metal engine
cover and set aside to access engine.
NOTE: Removal of the lavatory cabinet face is
required before removing the Metal
Engine Access Cover.
•
Reverse steps to reinstall engine access cover,
access panels, and lavatory cabinet face.
FUEL/WATER SEPARATOR –
DIESEL
Freightliner
®
Chassis
Diesel fuel often contains small quantities of
water, which can damage the engine if not
filtered out. The Fuel/Water Separator traps this
water and prevents it from reaching the engine.
The harmful water deposits must be drained from
the separator canister during normal periodic
service and maintenance to keep the fuel
filtration system working effectively.
The Fuel/Water Separator is located beneath
the passenger rear side of chassis (at the forward
right side of the engine).
Place an appropriate container beneath the
bottom of the Fuel/Water Separator Filter and
open the water release drain valve several turns.
Drain any water deposits from the canister until
clean diesel fuel flows from the valve. Close
valve by hand. Do not over tighten.
Suction Cup
Lift
Diesel Fuel/
Water Separator
(Filter)
(Located beneath passenger
rear side of chassis)
-Typical View
Fuel Filter