![background image](http://html1.mh-extra.com/html/winnebago/journey/journey_service-manual_987364054.webp)
SECTION 3 –
DRIVING YOUR MOTORHOME
3-28
WINDSHIELD WASHERS AND
WIPERS
The Windshield Washer Fluid Reservoir is
located behind the front hood panel (see “Front
Service Access” elsewhere in this section for
instructions on opening the hood panel).
We recommend using commercially available
premixed solutions for best results. Avoid using
water in freezing temperatures, as the washer
pump could become damaged.
TIRES
Improper tire pressure can result in tire
overloading and abnormal wear and also affects
handling, ride characteristics, and fuel economy.
HUB COVER
Freightliner
®
Chassis supplied with Alloy
Wheels
•
To remove the rear hub cover, locate the hub
cover wrench (with directional indicator
arrows) from the InfoCase.
Attach the hub cover wrench to the hub
cover.
•
Align the hex of the wrench opening with the
hex of the hub cover center nut and move
wrench inward until the nut surface is
outboard of the wrench.
Driver Side (left hand thread)
•
To Remove turn clockwise.
•
To Install turn counter-clockwise.
Passenger Side (right hand thread)
•
To Remove turn counter-clockwise.
•
To Install turn clockwise.
Further Information
Contact Freightliner
®
Custom Chassis for
more information: 1-800-FTL-HELP (1-800-
385-4357).
WARNING
Make sure all replacement tires are of the
same size and rating as those shown on
your Vehicle Certification Label.
Windshield Washer Reservoir
(Located behind front hood panel)
-Typical installation shown
Hub Cover Wrench
(Located)
-Typical View