![background image](http://html1.mh-extra.com/html/winnebago/journey/journey_service-manual_987364030.webp)
SECTION 3 –
DRIVING YOUR MOTORHOME
3-4
2. Make sure that it will attach to your vehicle
and restrain your child securely and
conveniently so that you are able to install it
correctly each time it is used.
3. Be certain that it is appropriate for the child's
height, weight, and development. The
instructions and/or the regulation label
attached to the restraint typically provides this
information.
4. Review the instructions for installation and
use of the restraint. Be sure that you
understand them fully and can install the
restraint properly and safely in your vehicle.
Tether Anchor Loop
-If Equipped
If your coach has a dinette, it may be equipped
with a child seat tether anchor loop located on the
floor or wall directly behind the forward facing
dinette seat.
NOTE: The dinette table must be in the lowered
position when a child seat is in use.
Further Information
See the child seat manufacturer’s specific
instructions for proper attachment and
adjustment of the tether and seat belts.
KEYONE
™
LOCK SYSTEM
-If Equipped
Your coach is equipped with the KeyOne lock
system. A single key will open every door lock in
the entire vehicle and ignition (except the
security deadbolt lock on the entrance door).
The key number for your coach is registered in
our factory database, so if you ever lose your
keys, any Winnebago Industries
®
dealership can
order a new key for you.
POWER DOOR LOCKS
Your coach is featured with an entrance door
power lock system. The Power Door Lock
switches are located on the passenger side trim
panel and the dash.
Tether Anchor Loop
1. Lower the dinette table.
2. Route the tether over the top of the dinette seat
back and hook it to the anchor loop on the floor.
3. Fasten the lap belt.
3
2
1