Peripheral Setup Menu
(Figure 8.5)
Com2 Port (Modem): If you have an internal modem for your WinBook
XL2, this item should be set to “Auto.” If enabled, the modem port will be
the Com2 port on your system. If you find that the “Auto” setting causes
conflicts with other devices, you can use one of the other settings available
under this option. For more information about I/O addresses and interrupts
(IRQs), see the WinBook XL2 Help file, located in the WinBook folder of
the Start menu. If your system does not have an internal modem, this
option will be set to N/A and be “display only”.
Com1 Port: This item allows you to set the I/O address for the COM1
(serial) port. You can disable this port, set it to “auto” (which will automat-
ically set the address on system start-up), or set a specific address. Be
aware of conflicts that might arise if you set more than one device to a spe-
cific address. Your system might have come set to a specific address. If
so, you should leave this item set to the address to assure proper function-
ing of your serial port.
Com3 Port (IR): This item allows you to set the I/O address for the
COM3 (infrared) port. You can disable this port, set it to “auto” (which
will automatically set the address on system start-up), or set a specific
address. Be aware of conflicts that might arise if you set more than one
device to a specific address. Your WinBook XL2 will come with the IR
disabled to keep conflicts minimized during normal operation. You can
activate this feature at any time by following the instructions provided in
the Help file in the WinBook folder of the Start menu.
IR Mode: This item allows you to set the mode for the IR port. The
options are: IrDA and ASK-IR.
IR DMA Channel: DMA channels allow a device to bypass the processor
and can help speed up transmission of information from peripheral devices.
If your IR is activated, you can set the DMA channel address to be used for IR.
If you want to learn more about DMAs, check the WinBook XL2 Help file.
8.14
User’s Manual
You should leave the set-
tings in this menu at the
values preinstalled by
WinBook unless you have a
specific reason for changing
them and are an experienced
user. Changing settings in this
menu can affect the operation
of your system.
Содержание XL2
