Winbook XL2, Руководство пользователя

Страница: 128 / 211

9. Holding the card at a shallow angle, insert the edge connector into the
slot. When the card is fully inserted, the gold edge connector should
not be visible.
10. Press the card downward until it is flat. You should hear an audible
click as the latches of the connector secure the card in place.
11. Once the chips are properly seated, you can replace the cover on this
compartment. Line up the cover and insert it at a 45-degree angle (with
the far edge down). (Figure 7.6)
12. Push the cover down until it is flat and slide it towards the rear of the
computer as far as it can go.
13. Slide the end caps back on.
14. Start your computer. The WinBook XL2 should automatically register
the new memory. If the memory size indicated during the POST
User’s Manual
7.6 7.6
The panel that holds the
memory slots also con-
tains the BIOS chip for
your system and your internal
speakers. Each is a fragile piece
of equipment and you should
exercise care when working in
this compartment. You should
never attempt to remove or
replace the BIOS chip yourself
since it can result in damage to
your system. BIOS upgrades are
done by a software update of
the chip, so the chip should be
left untouched.
Figure 7.6: Replacing RAM Compartment Cover