Whirlpool Cassinetta, Руководство по ремонту

Страница: 2 / 78

2
General Information

NTC resistance table v/s temperature table page 3

Timetable of electronic boards versions page 4

List of failure codes for LCD version page 5

List of failure codes for 7-segment display version page 6

List of failure codes for Biruni version page 7

Typical alarm summary page 8

List of typical icons of all electronic versions page 9 – 10

List of common questions (customer/end consumer)
Old ITW no-dispenser version
page 11 – 12
Old ITW 7 segment dispenser version page 13 – 14
LCD version page 15
AKO version page 16 – 17
Biruni version page 18 – 19

Current electronic control architecture, instruction for connection page 20

List of other generic questions from customer / end customer page 22

Built-in test page 23 – 25

Ice Maker typology page 26

SbS IDI R600 Electronic E-module page 27 – 30

SbS IDI R134 Mechanical page 31 – 37

SxS NO IDI Mechanical page 38 – 40

SxS NO IDI Sankyo page 41 – 44

SxS NO IDI – Group ice crusher and water dispenser page 45 – 46

Anti condensate function page 47

Best position for Lokring connectors on R134a and R600a version page 48
Troubleshooting & Diagnostic

Sensor failure indication “C” or “SF” on the display page 49

Air baffle failure indication “d” on the display page 50

Test points on air baffle & Damper defects page 51

Communication failure indication “CF” & Bad connections check page 52

Compartment temperatures unstable page 53

Fridge temperature too cold in meat-pan drawer page 54

Fridge temperature too cold in upper fridge shelf’s page 55 – 56

Freezer temperature too warm - Over temperature alarm always on page 57 – 59

How to check the freezer temperature at the ice maker air duct page 60

Fridge temperature too warm page 61

The appliance does not cool at all page 62

Fridge compartment temperature too warm
and freezer compartment completely frozen ( -28°C )
page 63

Ice formation on the inner liner freezer flap or roof and light switch page 64

Ice formation on the freezer bottom page 65

Ice formation and moisture in freezer compartment page 66

No ice production ( no ice in the ice container ) page 67

Not delivered ice ( ice produced but not crushed / delivered ) page 68 – 69

Mid trans bar too hot ( higher than 50°C ) page 70

Noise from appliance page 71 – 73

Fridge or freezer “open door alarm” always on and red led is flashing page 74
Fridge and/or freezer internal lamp doesn’t work page 74

User interface blackout page 75
User interface automatic stand-by or automatic change of temperature set-up page 75

User interface flickering display, automatic change of temperature
Set-up, random engagement of the solenoid and the water valve, not
Delivered ice (in some conditions), for 2008 Biruni appliances
page 76

Iced water presence all around the icemaker page 77

Not delivered water page 78