Terrazza Originale
Instructions for assembly
Version 5
12.06.2017
We reserve the right to make technical changes
Item number
111361-0000
Page 42/104
3.18 Screwing the mounting plates to the roof supports
Select the mounting plates that best suit the roof support in question.
Determine where the mounting plates should be fitted onto the roof supports.
Align the mounting plates and fix in place using e.g. a C clamp.
Drill a 4.8 mm hole through the mounting plates and into the roof support and then screw in
place using self-tapping screws.
Be sure not to cause any leaks in the roof support when fitting the mounting plates.
Figure: Screwing the mounting plates to the roof support
1
Support bracket mounting plate for roof support 150
a)
Roof support 150
b) Roof support 110
5.5x19
Tx
b)
a)