Terrazza Originale
Instructions for assembly
Version 5
12.06.2017
We reserve the right to make technical changes
Item number
111361-0000
Page 87/104
5.3.2 Fitting the wall bracket glazing beads
Before fitting the roof supports, the wall bracket glazing beads must be fitted and affixed in
the correct position of every roof area that has an angled wall bracket as it will not be
possible to fit the wall bracket glazing beads after the roof supports have been installed.
There are two places where the wall bracket glazing bead can be installed: "top and
bottom".
Exactly where the wall bracket glazing bead should go depends on the thickness of the roof
covering. Based on the place of installation, different wedge seals (3-4; 4-7; 5-9 mm) will be
used. Both the location of the wall bracket glazing bead and the rubber to be inserted are
indicated on the delivery note supplied.
Figure: Wall bracket installation
A
Wall bracket glazing bead position 1 = bottom
B
Wall bracket glazing bead position 2 = top
1
Wedge seal
2
Wall bracket glazing bead
3a
Glass
3b Web plate 16 mm
