WEIHONG NK280 Скачать руководство пользователя страница 157

Страница: 157 / 158

上海维宏电子科技股份有限公司

Weihong Electronic Technology Co., Ltd.

Specialized, Concentrated, Focused - 151 -

8 Software License Agreement

Important

—Read Carefully before Using This Product:

The term ―Software Product‖ includes all copies of the licensed software and its documentation. This

license agreement is a legal agreement between You (either an individual, a legal entity or any affiliated

companies or other entities) and Weihong Electronic Technology Co., Ltd. (hereinafter referred to as

Weihong Company). By installing, copying, or otherwise using the Software Product, you agree to be

bound by the terms and conditions of this license. Unless otherwise stated in this agreement, you shall

not use, copy, revise, rent, or transfer the Software product or any part of the Software Product for any

other purposes.

Description of Further Rights and Restrictions:

1. You may install for use one copy of the Software Product on a single machine;

2. You may make a copy of the Software Product for archive or backup purposes and the copy is

to be used on this machine only;

3. You may transfer the Software Product and the license agreement to a third party, provided that

the third party accepts the terms and conditions stated in this agreement, with prior express

permission from Weihong Company;

4. When transfer confirmed, you shall transfer all the copies of the original documents and the

supplementary documents to the third party or destroy all the copies un-transferred.

5. You can use the Software Product on a network server or intranet server only if it is stipulated in

explicit terms that you are allowed to use the Software Product on a network server or intranet

server, or you have purchased license for each node and terminal using the Software Product;

6. You may NOT sublicense, assign or transfer the license agreement;

7. You may NOT or direct any third party to reverse engineer, decompile or disassemble the

Software Product;

8. You may NOT copy or transfer the Software Product or any part of the Software Product unless

otherwise expressly stated in this agreement;

9. The license agreement shall be terminated automatically upon you transfer the Software

Product or copies of all or part of the Software Product to a third party.

Intellectual Property Rights Notice:

The Software Product and all intellectual property rights therein (including but not limited to any all

copyrights, patents, trademarks, and publicity rights) are owned by Weihong Company. The Software

Product is protected for Weihong Company on the basis of copyright law and international treaty

provisions as well as on the basis of other laws and agreements regarding intellectual property. You are

not allowed to remove the copyright statement made in the Software Product, and guarantee that you

shall copy the copyright statement in all copies of the Software Product or of any part of the Software

Product. You are obliged to stop any form of illegal copying of the Software Product and accompanying

materials.

After-sales Guarantee:

Weihong Company guarantees that for 90 days from the date of shipment the software carrier will

be free from defects in materials and workmanship. When such a defect has been confirmed, our only

responsibility is to replace the software carrier. This remedy is your exclusive remedy. This after-sales

guarantee is invalid for any carrier defect caused by accidents, abuses or maloperation. The replaced

software carrier enjoys the remaining guarantee time of the original software carrier or of a 30-day

Содержание NK280































































































































































Результаты поиска

Содержание NK280

Отзывы:

Похожие инструкции для NK280

Бренды по названию

Популярные бренды

WEIHONG NK280, Руководство производителя

Результаты поиска

Содержание NK280

Отзывы:

Похожие инструкции для NK280

Бренды по названию

Популярные бренды