上海维宏电子科技股份有限公司
Weihong Electronic Technology Co., Ltd.
- 74 - Specialized, Concentrated, Focused
Translation Parameters of ENG File
Parameter
Meaning
Setting Range
Select
tool
for
ENG
If this parameter is set as Yes, opening an Eng file will
eject a dialog box asking users to select a tool (the tool
specified in the Eng file instead of the system default
tool) for processing based on the processing program.
No: Not use
Yes: Use
Select
tool
for
ENG
Only available for ENG5.50 and 5.53.
No: Not use
Yes: Use
Tool
change
prompt
If it is set as Yes, when tool change command is
encountered, machine tool will suspend processing and
uplift its Z axis, and prompt bar in the system will prompt
tool change. At this time, users can perform the
operation of tool change. If it is set as No, when tool
change command is encountered, machine tool will not
suspend processing, but the prompt bar in the system
will still prompt tool change.
No: Invalid
Yes: Valid
Tool lifting height
It sets the tool lifting height of Z axis during rapid
traverse of machine tool when an ENG file is being
processed.
0~100000 (mm)
Retract amount
It indicates the retract value after feed each time in
manner of high-speed reciprocating chip removal for
deep hole drilling.
0~100000 (mm)
Cycle times of
ENG processing
It sets the cycle times to process an Eng file.
/
Deep
hole
machining
manner
It sets the manner for processing deep holes.
0:
Reciprocating
chip removal
1:
High-speed
reciprocating
chip
removal
Translation parameters of ENG file are applied to translation for ENG files, including
―Tool lifting
height‖, ―Tool change prompt‖, etc.
Translation Parameters of PLT File
Parameter
Meaning
Setting Range
Tool lifting height
It sets the tool lifting height during rapid traverse.
0~100000 (mm)
Plt unit
Normally, 1plt=40.195mm, which can be magnified or
reduced by setting this parameter.
0~100000 (mm)
Tool step
To process the workpiece adequately, tool spacing set
needs to make the parts between the adjacent tool
paths overlapped based on the tool diameter. Tool step
here refers to the tool spacing in PLT file machining.
0~100000 (mm)
Machining depth
It specifies the machining depth for 2D files.
/
PLT file translation parameters are applied to translation of PLT files. PLT is a format of 2D
machining files defined by an American company Hewlett Packard (HP), usually used in
embossment and advertising carving, including such parameters as ―retract‖, ―PLT units‖, ―tool
offset‖ and ―cutting depth‖. At the same time, PLT is a kind of unit. Normally, 1plt=40.195mm, which
can be magnified or reduced by setting the parameter
―PLT unit‖.
