WEIHONG LS6000M, Руководство пользователя

Страница: 57 / 121

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
.
54 / 116
o
Value: 6000
4.3.6 Real-time State Check
Includes the following parameters:

Detect Out-margin
o
Description: Indicates whether to enable out-of-edge detection during
following. Axis movement will be stopped if the system detects that it has
exceeded the edge.
o
Range

Yes: Enable

No: Disable
o
Value: Enable

Empty Leapfrog Detection Tolerance
o
Description: The tolerance of empty leapfrog detection.
o
Range: 0 mm
–225 mm
o
Value: 3
4.3.7 Manual Speed
Includes the following parameters:

Manual Acceleration(Z)
o
Description: The Z-axis acceleration in manual mode.
o
Range: 0 mm/s
2
–100000 mm/s
2
o
Value: 5000

Rapid Manual Feedrate(Z)
o
Description: The Z-axis speed in rapid manual mode.
o
Range: 1200 mm/min
–30000 mm/min
o
Value: 1800

Manual Feedrate(Z)
o
Description: The default Z-axis speed in manual mode.
o
Range: 0.1 mm/min
–1800 mm/min
o
Value: 1200
4.4 Common Problems
This section introduces troubleshooting methods for the following common problems:

Serious Electric Interference

Capacitance is Not Zero when Touching the Material

Cutter Continues Lowering After Touching the Material During Calibration

Actual Follow Height Differs from Setting

Cutter Stops Working Frequently when Capacitance Feedback and Calibration
Results are Normal

Cutter Has Severe Jitters When Cutting Thin Plates and Causing Workpiece Outline
Deformation

System Reports Follow Error when Moving Z axis or Enable Follow

Encoder Direction or Axis Direction Error

Follow In-position Waiting Timeout

Large Follow Error Alarm

System Reports Material Collision Alarm when Follow is Enabled in Idle Status or
During Machining

System Reports Material Collision Alarm when the System Has No Movement

Follow Overshoot