WEIHONG LS6000M, Руководство пользователя

Страница: 26 / 121

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
.
23 / 116
o
Format: X2X1X0. X2X1X0=100: External EMG (emergency stop input) was
not used.
o
Range: -
o
Value: 100

P2-21 Digital output pin DO4 function setting
o
Description: DO4 pins are pin No.1 and No.26, which are used for Z-axis
clamping position braking signals.
o
Unit: -
o
Format: X2X1X0

X2=1: Set DO4 output to the NO contact a. X2=1: Set DO4 output to
the NC contact b.

X1X0=08: Set pin No.1 and No.26 to BK+ and BK- respectively.
o
Range: -
o
Value: 108

P2-22 Digital output pin DO5 function setting
o
Description: DO5 pins are pin No.28 and No.27, which are used for servo
alarm signals.
o
Unit: -
o
Format: X2X1X0

X2=0: Set DO5 output to the NC contact b.

X1X0=07: Set pin No.28 and No.27 to ALRM+ and ALRM-
respectively.
o
Range: -
o
Value: 007

P2-51 Servo enablement SON setting
o
Description: Servo enablement SON setting
o
Unit: -
o
Format: -
o
Range

0: Servo motor enablement must be triggered by digital signals.

1: Servo motor is automatically enabled after powered on if there is no
alarm.
o
Value: 0 (1 when SON signal cables are unavailable)
3.4.1.1.9 Delta ASDA-A2
The parameters and descriptions are shown below:

P0-02 Drive status display
o
Description: Pulse detection is used in WEIHONG control systems to check
to see if correct pulses are sent and determine if there is electric interference.
o
Unit: -
o
Format: -
o
Range: -
o
Value: 02

P1-00 External pulse input format
o
Description: External pulse input format
o
Unit: -
o
Format: ZYX

X=2: The external pulse input format is pulse + direction, negative
logic

Z=1: negative logic