WattMaster Auto-Zone Plus, Проектирование, установка и эксплуатация

Страница: 168 / 180

Section 4 Auto-Zone Plus
4-50 Start-Up and Troubleshooting
4.2.6 Setting the CV Controller Address Switch
Figure 4-15:
CV Controller Address Switches
Address Switch Shown Is
Set For Address 9
Address Switch Shown Is
Set For Address 30
Controller
Address Switch
ADDRESS
ADD
SW1
SW1
ADDRESS
ADD
CV Controller Address Switch Setting CV Controller Address Switch Values
Address Switch Setting Chart For CV Controllers
ADDRESS ADD
ADDRESS ADD
ADDRESS ADD ADDRESS ADD ADDRESS ADD ADDRESS ADD
ADDRESS ADD ADDRESS ADD ADDRESS ADD ADDRESS ADD ADDRESS ADD
ADDRESS ADD ADDRESS ADD ADDRESS ADD ADDRESS ADD ADDRESS ADD
ADDRESS ADD ADDRESS ADD ADDRESS ADD ADDRESS ADD ADDRESS ADD
ADDRESS ADD ADDRESS ADD ADDRESS ADD ADDRESS ADD ADDRESS ADD
ADDRESS ADD ADDRESS ADD ADDRESS ADD ADDRESS ADD ADDRESS ADD
SW1
SW1
SW1 SW1 SW1 SW1
SW1 SW1 SW1 SW1 SW1
SW1 SW1 SW1 SW1 SW1
SW1 SW1 SW1 SW1 SW1
SW1 SW1 SW1 SW1 SW1
SW1 SW1 SW1 SW1 SW1
1
2
4
8
16
32
(Always OFF- Not Used)
TOKEN
(Always OFF)
NETWORK
(Always ON)
1
6
11
16
21
26
12
17
22
27
13
18
23
28
14
19
24
29 30
15
20
25
2
7
3
8
4
9
5
10
Address Switch Values
Switch Shown Is
Set For Address 5
Note:
1.) Ignore Any Markings On The Switch Body.
2.) Use The Address Charts Below Or Address Switch
Value Table Above To Determine Correct Switch Setting.
3.) Power To Controller Must Be Turned Off And
Back On In Order For Switch Settings To Take Effect.
Address Switch Values Are Not
Labeled On The CV Controller
Use The Table Below
Address Switch Values Are
Added Together When The
Rocker Is Pushed Down In
The Direction Of The “ADDRESS
ADD” Arrow Marked On The CV
Controller Circuit Board
firealarmresources.com