Watt Drive V3000-015HF, Руководство пользователя

Страница: 39 / 180

Explanation of Function
Seite 39 / 180
Name Contents
Monitor Display of frequency, output current and set value
Lamp on RUN
(Operation) Light on when the inverter is running
Program lamp
Light on when displaying set value of each function in monitor section
Light will flash On and Off as a warning (when set value is incorrect)
POWER lamp Power lamp of control circuit
ALARM lamp Light on when the Inverter trips
Monitor lamp
Lamp display state of monitor section.
Hz : Frequency V : Voltage A : Current kW : Electric power % : Rate
Operation command
Display lamp
Light on only when operating command (RUN/STOP) is set in operator
Run key
Run command to start the motor. But this is only valid when operation
command is from the operator. (Be sure that the operation command display
lamp is illuminated.)
Stop (stop/reset) key This key is used to stop motor, or reset an alarm.
FUNC (Function) key
The key containing monitor mode, basic setting mode, extension functions
mode.
STR (Store) key The key to store the data set. (On changing set value, must be pushed or value
is lost.)
UP/DOWN key The keys to change extension function mode, function mode and set value.