Watt Drive V3000-015HF, Руководство пользователя

Страница: 34 / 180

Operation
Seite 34 / 180
3.2 Test Run
This is the common connection example. Please refer to 4.1 Digital Operator, for the detailed use of
the digital operator (OPE-SR).
(1) To input the operation setting and the frequency setting from terminal control.
(Arrangements)
[1] Please make sure that the connections are correctly secure.
[2] Turn the ELB ON to supply power to the inverter.
(The red LED “POWER” on the digital operator should illuminate.)
[3] Set terminal with the frequency setting selection.
Set A001 as indication code, press the key once. (Two figures are shown.)
Set 01 with the key or the key, press the key once to set the frequency setting for
terminal. (Indication code turns back to A001.)
[4] Set terminal with the operation setting selection.
Set A002 as indication code, press the key once. (Two figures are shown.)
Set 01 with the key or the key; press the key once to set the operation setting for
terminal.
(Indication code turns back to A002.)
[5] Set monitor mode.
When monitoring the output frequency, set indication code to d001, and press the key once.
Or when monitoring the operating direction, set indication code to d003, press the key once.
[6] Input starting operation setting.
Turn ON between [FW] and [CM1] of terminal.
1 2
1
2
FUNC
STR
FUNC
STR
FUNC
FUNC
Direct current reactor
Operating box
(OPE-4MJ2)
(OPE-8MJ2)
Alarm output contact
L
O
H
Motor
U
V
W
PD
P
RB
N
AL0
AL1
AL2
1
SP
SN
RP
SN
G
A
AM
L
O2
OI
O
H
P24
PL
C
TH
FM
1
8
FW
R
S
T
Braking unit
R
S
T
Three Phase
Power supply
EL
Digital operator
(RV)
D earth (200V)
C earth (400V)
.