Watt Drive V3000-015HF, Руководство пользователя

Страница: 20 / 180

Installation and Wiring
Seite 20 / 180
2.1.2 Blind cover of wiring parts
(1) Cable entry through Rubber Bushes
The wiring should be done after making a cut in the rubber bushes with nippers or cutters.
(2) Cable entry through Conduit
After taking out the rubber bushes, connect the conduit.
Note; Except for when connecting conduit, Do not take out the rubber bushes. It is
possible that the wiring insulation is broken and a possible earth fault is caused.
2.2 Wiring
Rubber bushes
Wiring
cover
Be sure to ground the unit. Otherwise, there is a danger of electric shock and/or fire.
Otherwise, there is a danger of electric shock and/or injury.
Only qualified personnel shall carry out wiring work.
Otherwise, there is a danger of electric shock and/or fire.
Implement wiring after checking that the power supply is off.
Otherwise, there is a danger of electric shock and/or injury.
Be sure to implement wiring after installing the body.
Otherwise, there is a danger of electric shock and/or injury.
"Use 60/75 deg. Cu wire only" or equivalent.
"A Class 2 circuit wired with Class 1wire" or equivalent.
"Suitable for use on a circuit capable of delivering not more than 5,000 rms symmetrical
amperes, 240V
maximum". For models with suffix N or L.
"Suitable for use on a circuit capable of delivering not more than 5,000 rms symmetrical
amperes, 480V
WARNING