Waterous CM Series, Руководство по установке, Страница: 3 / 56

Table of Contents
Safety 4
Safety Precautions 4
Introduction 7
Using this Document 7
Viewing the Document Electronically 7
Printing the Document 7
Additional Documentation 7
Symbols 7
Product Overview 8
CM Series Pumps—Drive Options 8
CM Series Pumps—Intake and Discharge Flanges 9
CMD/CMUD 10
CMK/CMUK 11
CMPA/CMUPA 12
CMC22/CMUC22 13
CMC22/CMUC22 (Front-Mounted) 14
Transfer Valve Actuator Control Panel—Manual Version 16
Manual Transfer Valve Actuator 17
Encoder Extension Cable 18
Transfer Valve Actuator Control Panel—Electric Version 19
Electric Transfer Valve Actuator 20
Power Relay Module 21
Motor Extension Cable 22
Transfer Valve Actuator Manual Override—Optional 23
Installation 24
Installation Overview 24
Preparing for the Installation 24
Modifying the Equipment 24
Determining the Pump Location 24
Determining Cable and Wire Routing 24
Optional Equipment 24
CMD/CMUD—Installing the Pump 25
CMK/CMUK—Installing the Pump 26
CMPA/CMUPA—Installing the Pump 27
CMC22/CMUC22—Installing the Pump 28
CMC22/CMUC22 (Front-Mounted)—Installing the Pump 29
Mounting the Angle Brackets 30
CMC22/CMUC22 (Front-Mounted) 31
Optional Spring Configuration 32
Mounting the Pump 33
3-Point Mounting Method 33
3-Point Mounting Method—CMC22/CMUC22 (Front-Mounted) 34
4-Point Mounting Method—Optional Spring Configuration 35
Installing the Pump Drain Lines—Pump Body 36
Installing the Transmission Drain Lines—CMK 37
Installing the Transmission Drain Lines—CMUK 38
Installing the Transmission Drain Lines—CMPA/CMUPA 39
Installing the Transmission Drain Lines—CMC22/CMUC22 40
Installing the Transfer Valve Actuator—Manual Version 42
Mounting the Control Panel 42
Installing the Handle 43
Installing the Control Rod 44
Connecting the Components 45
Installing the Transfer Valve Actuator —Electric Version 46
Mounting the Control Panel 46
Mounting the Power Relay Module 47
Connecting the Components 48
Installing the Transfer Valve Actuator —Manual Override 49
Mounting the Control Panel 49
Installing the Crank Handle 50
Installing the Control Rod 51
CMCGV/CMUCGV—Building the Isolation Valve Controls 52
Installing the Anodes and Intake Screens 53
Tachometer Connection 54
Lubrication 54
Transmission Temperature Specifications 54
Testing After Installation 54