Waterous CM Series, Руководство по установке, Страница: 48 / 56

48
|
56
Safety Introduction Product Overview Installation
Installing the Transfer Valve Actuator—Electric Version
Connecting the Components
Use the illustration and instructions to connect the
cables for the electric actuator assembly.
1 Connect the control panel connector to the
extension cable connector.
2 Connect the extension cable connector to the
encoder connector.
3 Connect the control panel connector to the
power relay module connector.
4 Connect the power relay module connector to
the motor extension cable connector.
5 Connect the motor extension cable connector to
the gear motor connector.
6 Connect power (red/white) and ground (black)
from the control panel to the appropriate
source.
7 Connect power (red/white) and ground (black)
from the relay module to the appropriate
source.
6
1 3
7
2
5
4