Waterous CM Series, Руководство по установке, Страница: 36 / 56

36
|
56
Safety Introduction Product Overview Installation
Installing the Pump Drain Lines—Pump Body
Use the illustration and instructions to install the
pump drain lines. Fluid that is susceptible to
freezing must be drained from the pump to
prevent damage.
NOTICE
• Do not allow fluid in the
lines to freeze.
• Remove all freezable fluid
from the lines before
storing the apparatus.
Freeze Damage
1 To drain the pump, do the following:
• Locate the 4 drain ports at the bottom of the
volute cover.
• Install the appropriate fittings and hoses to
drain the pump as required.
2 To drain the seal cooling hose, do the following:
• Locate the drain port on the tee fitting.
• Remove the drain plug.
• Install the appropriate fittings and hoses to
drain the seal cooling hose as required.
1
2